Wool specification

REDA — Describe the cloth you want to review

  1. Current cutting
  2. Target difference
  3. Review context

Name the wool cloth you can already describe, the change you want compared, and the garment step that makes the comparison matter. A jacket front that will be fused is a different note from a trouser cloth that must hold a crease. Leave unknown GSM, cuttable width and face finish as blanks rather than estimates.

Before you send

Use the four lines below as a working checklist, not as values this site has already measured for wool cloth. Write only what you know from a cutting, a previous specification, or the garment pattern. If a line is missing, say missing. That keeps a target weight from being read as a laboratory result, and it keeps a nominal width from being treated as the cuttable width of a specific piece.

Write contrasts as questions. A stock clipping and a custom development are different routes: one needs the lot date and whether that lot can be repeated, the other needs the sample, the test and the bulk-approval step. A 270 g/m² wool target and a 270 g/m² wool-polyester target can share a mass and still split on dry handle versus drying and crease hold. Abrasion cycles do not settle itch or crease. Keep coating or membrane words out of a wool suiting brief unless that construction is actually present. Record the review date from the cutting ticket; this page does not supply one.

Unbranded wool cuttings and a width tape on a specification desk
No street address, phone number or opening hours are published for this site. Use the form for the cloth brief.