| Use condition | Material question | Evidence context |
|---|---|---|
| Repeated contact | How does the wool face behave against lining, a bag strap or daily wear? | A wear or pilling method that names cycles, abradant and the finish state of the specimen. |
| Moisture | Is the question rain shedding, vapour movement, or simply how the cloth feels after humid wear? | Keep liquid resistance and moisture vapour as separate methods. Wool suiting is not described here as waterproof. |
| Dimensional change | What pressing, fusing and after-care will the cloth see? | Record the test state, the reference relaxation and whether the cutting was already finished. |
| Joining | How will panels be seamed, and does the pattern need the full cuttable width? | Construction, seam slippage context and usable width rather than overall cloth width. |
| Colour | Which physical shade is the standard, and which lot is being compared? | A shade band judged on cuttings, with light condition and lot identity written beside the decision. |
Results from different methods are not automatically comparable. A wool jacket cloth and a heavier coating cloth can share a fibre name and still need different evidence.
Repeated contact on a tailored jacket is mostly face abrasion, seat shine and pilling at folds. Ask which face was tested, because a milled surface and a clear-finish worsted do not present the same yarns to an abradant. If comfort is the goal, a cutting in the hand still matters: a number for abrasion does not describe itch, drape or how the cloth takes a crease.
Moisture questions should be split before any comparison. Liquid water on a wool suit is usually a care and finish topic, not a hydrostatic-head claim. Vapour movement through a cloth is a different setup, with its own gradient and conditioning. Writing both ideas under one word such as breathable hides which property was measured. Humidity that changes handle during a fitting is a third, practical note and does not need to be forced into a membrane vocabulary.
Pressing and fusing change dimensions. A brief for trousers should say whether a crease is required and which fusible, if any, will sit behind the wool. Dimensional change results belong with the specimen that was actually steamed or washed, and with the relaxation step the method required. Do not move a shrinkage figure from an unfinished piece onto a milled cloth.
Seaming needs usable width and a comment on edge behaviour. Pattern pieces that were planned on a nominal width can fail when selvedge is excluded. Seam slippage, tear and tensile results, when they are supplied, should name the direction, warp or weft, and the finish. Colour closes the matrix: approve shade on cuttings from the lot under discussion, and keep that approval with the composition declaration so a later piece can be compared with the same reference.
An application page is a way to frame the environment, the stress and the assembly question. It is not a list of completed installations. Describe contact, exposure, care and processing separately, then ask which evidence belongs to that condition.
| Condition | Question | Evidence context |
|---|---|---|
| Daily contact | What touch, care and surface change matter? | Physical sample and the stated care context |
| Moisture | Is the question liquid resistance or vapour movement? | Method and specimen conditioning |
| Assembly | How will the textile be cut or joined? | Construction and usable width |
| Colour | Which physical reference is under review? | Shade approval notes, not a screen swatch |
Wear, pressing and seaming make a suiting brief specific.
Send the use conditions